This project is for a 18ga. stainless steel
set of vambraces with a Fleur de Lies decore



This page is depicting the project as we make the vambraces.


-15 Oct. 2006-
This is the pattern and the cut.
With the robing lines.
The edges are rolled. The art on the first vambrace.
Ready to acid etch. After the first etching.
The sun was very high, but here it is all done. End -

To the OnLineArmory.com

Klaus Jürgen Gehr (Armorer)

You can contact me at: klaus@onlinearmory.com
Last Modified: Oct. 15, 2006