This is a Dishing form for Andrew,
who is also a armourer.


This page is depicting Andrew's project as we cut and clean the form.

-Jan.13, 2007-
The bottles on hand.		 Andrew wanted the 6.5 inches by 1.25 inches deep form.
After the cut with a cut off disk. Cleaning off the rust with a steel brush. These bottles are about .5 inches thick.
Before and after pictures. . Now comes the grinding down the form and removing all the writing inside.
-Jan.14, 2007-
After the TIG welding and polishing.
The End

To the OnLineArmory.com

Klaus Jürgen Gehr (Armorer)
You can contact me at: klaus@onlinearmory.com
Last Modified: Jan. 13, 2007